Shuttle SP35P2

CARATTERISTICHE TECNICHE:

• Chassis
  P2-type aluminum chassis, color: black
  storage bays: 1 x 5.25", 3 x 3.5" (2 internal)
  stealthed drive doors
  dimensions: 32.5 x 22 x 21 cm (LWH)
  weight: 4.2 kg net / 6.0 kg gross
• Mainboard
  Shuttle FP35, Shuttle form factor, proprietary design for XPC SP35P2
  Chipset: Intel P35 Express (MCH, codename: Bearlake-X) + ICH9R (I/O Conroller Hub)
  Solid Capacitors for excellent heat resistance for enhanced system durability
  Color slots/connectors design (Power switch, USB, PCIe, PCI)
  Dimensions: 20.5 x 28 cm
• Power supply
  400 Watt ATX mini PSU, AC input voltage: 100~240V
  80 PLUS® certified (80% or greater energy-efficient)
  Dimensions: 85(W) x 83(H) x150(D) mm
  Connectors: 2x3 pin (CPU power), 2x4 pin (mainboard power)
  Active PFC circuit (Power Factor Correction)
• Processor support
  Socket 775 supports Single, Dual and Quad Core processors from Intel
  with Core technology and 800, 1066 or 1333MHz front side bus:
  Supports Core 2 Quad, Core 2 Duo, Pentium Dual-Core,
  Celeron Dual-Core, Celeron 4xx
  Designed for the new Intel 45nm Core 2 multi-core processors
  Supports Pentium 4/D processors at 800MHz FSB.
  Processors with 533MHz FSB are not supported.
  Please refer the support list for detailed processor support information.
• Overclocking*)
  CPU frequency, CPU voltage, RAM frequency, RAM voltage
  Dynamic Overclock feature:
  Easily overclock from 3/5/7/10/15/20% through the BIOS.
• Processor cooling
  New Shuttle I.C.E. heat-pipe module (Integrated Cooling Engine)
  SilentX Cooling and Noise Reduction Technology
  advanced Heatpipe technology, linear fan control.
  3 independent cooling areas.
  OASIS Cooling Technology: additional fanless heat-pipe design
  covering the MOSFET modules (VRM), north- and southbridge
• Memory support
  4 x 240 pin slots, supports Dual Channel
  supports DDR2-667/800 SDRAM memory
  (DDR2-1066 in overclocking mode*)
  max. 2 GB per DIMM, up to a total size of 8 GB
• Slots
  1x PCI-Express x16 Steckplatz
  Supports Dual-slot (double-width) graphics cards
  1x PCI 32 bit slot
• 8-channel audio
  7.1 channel High Definition Audio with Realtek ALC888 codec
  analog: line-out (8-ch), line-in, microphone, CD-in, AUX
  digital: optical S/PDIF-in, optical and coaxial S/PDIF-out
• LAN Controller
  Marvell 88E8056 Ethernet network controller
  With PCI Express interface
  IEEE 802.3u 1000Base-T compliant
  Supports 10 / 100 / 1.000 MBit/s opteration
  Supports Wake-on-LAN
• Firewire Controller
  IEEE1394 Firewire controller TI TSB43AB22A
  Complies with 1394 OHCI specification revision 1.0
  2 Firewire connectors (front and rear)
  Supports 400Mb/s, 200Mb/s, 100Mb/s data transfer rate
• Drive connectors
  Serial-ATA II, 3 Gb/s (300 MB/s) bandwidth
  4x internal (SATA) plus 2x external (eSATA)
  Intel Matrix Storage Technology enabled striping and mirroring
  Supports RAID 0, 1, 5, 10 and JBOD on just two or three hard disk drives
  Supports Native Command Queuing (NCQ)
  1x IDE ATA 100 drives (JMicron JMB368 Controller)
  1x floppy disk drive
• Front Panel connectors
  Microphone
  Headphone (Line-out)
  2x USB 2.0
  Firewire (Mini 4 pin connector)
  Power button
  Reset button
  Power indicator (blue LED)
  HDD indicator (orange LED)
• Back Panel connectors
  6x USB 2.0
  Firewire (6 pin)
  GigaBit LAN (RJ45)
  2x External Serial ATA Hotplug (eSATA)
  8-ch Audio line-out (2x rear/front, bass/center, surround/back)
  Digital Audio S/PDIF: optical in/out, coaxial out
  Audio Line-in
  Clear CMOS button
  Perforation for optional Wireless LAN Antenna
• Other connectors
  4x USB 2.0 (two sets with 2x5 pins)
  4x fan connectors (3x 4 pins, 1x 3 pins)
  Headers for PS/2 mouse and PS/2 keyboard
• Accessories
  XPC Installation Guide
  XPC 32/64bit Driver CDROM for Windows XP/Vista
  Data cables: 1x floppy, 1x PATA, 2x SATA (PATA/SATA preinstalled)
  Power Cord
  Screws, Heatsink Compound
• Conformity
  This device is classed as a technical information
  equipment (ITE) in class B and is intended for use in
  living room and office. The CE-mark approves the
  conformity by the EU-guidelines:
  - EMV-guideline 89/336/EWG electromagnetic tolerance
  - LVD-guideline 73/23/EWG use of electric devices
  within certain voltage-limits

*) Overclocking Warning
Please note there is a certain risk involved with overclocking, including adjusting the setting in the BIOS or using third-party overclocking tools. Overclocking may affect your system stability or even cause damage of the components and devices of your system. It is done at your own risk and expense. Shuttle cannot be held responsible for possible damage caused by overclocking.